Creality Ender-6 - Page 27

This machine can print at a fast speed, but it is recommended to print at normal speed!Notes: the temperature of the nozzle is set according to the
printing speed. Take PLA as an example:
本机器支持高速打印，但建议以正常速度打印！ 注意：不同速率时，喷嘴打印温度需相应调整设置，创想配送PLA推荐设置参数：
The printing temperature is different owing to the variety of PLA filaments. Please refer to the actual situation.
打印温度会存在些许差异，请根据实际打印情况适当调整。
print speed
打印速率
100%
Print temperature
打印温度
Around 200℃
200℃左右
200%
Around 210℃
210℃左右
300%
Around 220℃
220℃左右
200
210
60
0.00
200
210
60
0.00