Creamsource Vortex 8 - Strobe; Random; Dual Level

Page 23Vortex8 User Manual
Version 1.2
5.6.9 Strobe
Strobe eect with control over frequency, brightness & duty cycle.
5.6.11 Dual Level
Set two dierent light levels and instantly switch between then using Flash button, DMX or external trigger signal.
5.6.10 Random
Create a random pattern of flashes with control over frequency, length & variation.
SETTING RANGE DESCRIPTION
FREQUENCY 0.1-50Hz Frequency of strobe eect
DUTY CYCLE 0-100% The ratio between light OFF and ON times
SETTING RANGE DESCRIPTION
FLASH LEVEL 0-100% Light output when FLASH button pressed on the control panel
SETTING RANGE DESCRIPTION
FREQUENCY 0.05-5.0Hz Frequency of random eect
LENGTH 2-200ms Maximum length of any flash
VARIATION 0-100% The amount of variation allowed from the eect
5. Controls