Creative Structures Sound Blaster 16

To Next Page

To Previous Page

Installing Software in DOS/ Windows 3.1x 3-3

Using Memory Managers

To bypass loading of low-level device drivers

1. During system startup, press and hold down the <Alt> key

when the message “Starting MS-DOS...” appears.

2. Release the key only when you see the DOS prompt.

Alternatively, you can use MS-DOS 6.x’s multiple boot

sessions feature. Create a session with settings that load the

drivers into memory. If you do not want to load these drivers,

select another session without them at system bootup.

(Refer to your MS-DOS 6.x documentation for instructions on

how to create multiple boot sessions.)

To use a memory manager

❑ If you are using MS-DOS 6.x, run MEMMAKER.

(For details, refer to your MS-DOS 6.x documentation.)

❑ If you have a memory manager such as QEMM or 386MAX,

refer to their respective documentation for instructions.

This manual downloaded from http://www.manualowl.com

Creative Structures Sound Blaster 16 - Using Memory Managers