D-2 Hardware Information
Redirecting PC Sounds to External Speakers
It is possible to redirect the sounds that normally come from your
computer’s speaker to the speakers connected to the audio card.
However, once you do this, you will not be able to hear POST beeps,
that is, computer beeps made during power-on self test.
Read this appendix only if you are an advanced user who
knows how to use the pin assignments. If you want to redirect
sound from your computer to external speakers, you should
also be familiar with your computer motherboard and should
where to find the internal speaker. You should seek the help of
an experienced technician to perform this task.
To redirect PC sounds to external speakers:
1. Locate and remove the PC Speaker connection from your
motherboard.
2. Connect a wire from the +5V DC pin of the motherboard
speaker connector to pin 1 of the PC Speaker connector on the
audio card.
3. Connect another wire from the PC Speaker Out pin of the
motherboard speaker connector to pin 2 of the PC Speaker
connector on the card.
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...