Creative Structures Sound Blaster 16 - Changing Audio Card Settings; Configuring Special Audio Features

Changing Audio Card Settings B-1
B
Changing Audio Card Settings
This chapter is organized as follows:
❑
Enabling/Disabling Creative 3D Stereo Enhancement Effect
❑
Enabling/Disabling Full-Duplex Operation
❑
Enabling/Disabling MPU-401 MIDI Emulation
❑
Enabling/Disabling Joystick or IDE Interface
These features may not be present on your card. See the
Knowing Your Audio Card
leaflet for the list of your card’s
features.
Enabling/Disabling Creative 3D Stereo
Enhancement Effect
The Creative 3D Stereo Enhancement (3DSE) effect allows you to
eliminate speaker crosstalk which occurs when two speakers are
placed close together. With this effect enabled, mono and stereo
sounds produced by your speakers will have increased depth and
breadth.
If your pair of speakers or another device already has a built-in
3D sound technology, do not activate this feature in both devices.
The 3D Stereo Enhancement effect, when activated with another
3D sound technology, may distort the audio output.
This manual downloaded from http://www.manualowl.com