9
Creative Video Webphone 3.0 Guide
Entering your activation key
When you start your Creative Video Webphone for the first time, you
will be asked to enter an “Activation Key”. The activation key is a
16-character code provided with your CD-ROM. Enter the
16-character activation key in the dialog box and select “OK”. Once
your activation key is verified, the enhanced features of the Creative
Video Webphone will be enabled, including unlimited talk time on
one line.
Entering information in the Configure window
When you start your Creative Video Webphone for the first time, it
will open the Configure window for you to specify your User
Information and Network Parameters. This information is very
important. If you enter erroneous data, chances are your Creative
Video Webphone will not operate properly. Once you enter your User
Information and Network Parameters, press the CONFIGURE text,
located on top of the Configure window, to save the information.
Entering your User Information
Please enter all your User Information. If it is inaccurate, you will be
misrepresented in NetSpeak’s Information Assistance and other
Creative Video Webphone users will not be able to find you to call
you. In addition, your ‘Caller ID’ information will be incorrect when
you place outbound calls.
Information
You can select how much of your user information will be published
in NetSpeak’s Information Assistance (all, some or none) to be made
visible to other Creative Video Webphone users.
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...