General Specifications
This section lists the general specifications of
your audio card.
Plug and Play
❑ ISA Specification version 1.0a compliant
Stereo Music Synthesizer
❑ 4-operator 11-voice or 2-operator
20-voice stereo music synthesizer
❑ Compatible with previous Sound Blaster
music synthesizer chips
Stereo Digitized Voice Channel
❑ Full duplex
❑ 16-bit and 8-bit digitizing in stereo and
mono modes
❑ Programmable sampling rates, 5 kHz to
44.1 kHz in linear steps
❑ First and Second DMA channels for audio
recording and playback
❑ Dynamic filtering for digital audio
recording and playback
Built-in Digital/Analog Mixer
❑ Mixes sources from digitized voice and
inputs from MIDI devices, CD Audio,
AUX, Line In, Microphone, and PC
Speaker
❑ Selectable input source or mixing of
various audio sources for recording
Volume Control
❑ Software volume control of Master
Playback Volume, Master Recording
Volume, Digitized Voice, and inputs from
MIDI devices, CD Audio, AUX, Line In,
Microphone, and PC Speaker
❑ Microphone level at 32 levels:
• above 0 dB, it is in 3 dB steps
• below 0 dB, it is in 1.5 dB steps
❑ All other sources at 32 levels in
1.5 dB steps
❑ Full software control of fade-in, fade-out,
and panning effects
Built-in Stereo Power Amplifier
❑ Four watts per channel with four ohms
stereo output
❑ Internal or External Audio Output
Amplifier
3D Stereo Enhancement Technology
❑ Increased depth and breadth in perceived
audio
❑ Enhances mono and stereo audio output
❑ Independent of speaker quality
❑ Independent of setup configuration (for
example, placement and alignment of
speakers with the listener)
MIDI Interface
❑ Built-in MIDI interface for connection to
external MIDI devices
Note: Your audio applications may
support only selected ranges of sampling
rates.
This manual downloaded from http://www.manualowl.com
To Next Page