Description: Scuba Preview Mode
Image on Top: Normal Display
Image at bottom: Large Display
To Access: Under Menu, press UP Button
/ DOWN Button to locate the cursor and
then press MODE Button once to select
Scuba Mode.
For more information, please refer to
Scuba Preview Mode.
Description: Nitrox Setting
To Access: Under Scuba Preview Mode,
press UP Button Or from SETTINGS,
press UP Button / DOWN Button to locate
the cursor at Nitrox and then press MODE
Button to select.
The Oxygen percentage value at the
bottom of the screen will start blinking.
Switch the option with UP Button / DOWN
Button, once the desired Nitrox option
appears, select it by pressing MODE
button once to accept the value.
Default: 21%
Setup range:
from 21% to 56%
WARNING:
Please make sure you have measured
the EANx gas of the cylinder you are
about to dive with and correctly input
that value in your computer. Before
using NITROX, you MUST have received
proper training and a certification that
qualifies you to use such gas. Diving
with Oxygen enriched mixes carries an
additional layer of risk.
To Next Page
Loading...
