Crest Audio CR4 - Freediving Mode Settings: Alarms; Freediving Time Alarm; Freediving Depth Alarm

Page 33
1.5.2 Freediving Mode Settings
Description: Freediving Time Alarm -
ON/OFF
To Access: Under Freediving Preview
Mode, press UP Button Or from
SETTINGS, press UP Button / DOWN
Button; until the cursor aligns with FTIME-
ALM. Press MODE Button once.
One of the FTIME-ALM options will be
blinking at the bottom. Press UP Button /
DOWN Button to select other options as
needed. Press MODE Button to accept
your selection. If you set the FTIME-ALM
on, when you reach the preset time, the
alarm will activate.
Default: ON
Setup range:
ON / OFF
Description: Freediving Depth Alarm -
ON/OFF
To Access: Under Freediving Preview
Mode, press UP Button Or from
SETTINGS, press UP Button / DOWN
Button; until the cursor aligns with FDPTH-
ALM. Press MODE Button once.
One of the FDPTH-ALM options will be
blinking at the bottom. Press UP Button /
DOWN Button to select other options as
needed. Press MODE Button to accept
your selection. If you set the FDPTH-ALM
on, when you reach the preset depth, the
alarm will activate.
Default: ON
Setup range:
ON / OFF