Description: Log Start at Depth Setting
(Log Start)
To Access: Under Freediving Preview
Mode, press UP Button Or from
SETTINGS, press UP Button / DOWN
Button to locate the cursor at LOG START
and then press MODE Button to select.
One of the log start depth options will be
blinking at the bottom. Press UP Button /
DOWN Button to select other options as
needed. Press MODE Button to accept
your selection.
Default: 1.0 m (3.3 ft.)
Setup range:
1.0 m (3.3 ft.), 1.5 m (4.9 ft.), 2.0 m (6.5
ft.), 2.5 m (8.2 ft.), 3.0 m (9.48 ft.)
Note:
This setting will automatically apply to
Scuba Mode and Gauge Mode.
Description: EXIT Freediving Mode
Setting
To Access: Under Freediving Preview
Mode, press UP Button Or from
SETTINGS, press UP Button / DOWN
Button; until the cursor aligns with EXIT.
Press MODE Button once.
To Next Page
Loading...