Crest Audio CR4 - Settings Mode: Button and Backlight; Button Volume and Backlight Settings

Page 45
1.10 Settings Mode
5 minutes, 10 minutes, 30 minutes.
Note:
Auto Power Off Settings only applies
settings of Watch Mode. While using the
dive computer to execute all diving
mood, the screen will remain turned on.
Description: Button Volume Setting
(BUZZER)
To Access: From SETTINGS, press the
UP Button / DOWN Button until the cursor
aligns with BUZZER. Press MODE Button
once.
One of the BUZZER options will be
blinking at the bottom. Press UP Button /
DOWN Button to select other options as
needed. Press MODE Button to accept
your selection.
Default: ON
Setup range: ON / OFF
Note:
Changing this setting only applies to
settings of Watch Mode.
Alarm Setting of all diving mode will not
be affected.
Description: Backlight Intensity Setting
(BACKLIGHT)
To Access: From SETTINGS, press the
UP Button / DOWN Button until the cursor
aligns with BACKLIGHT. Press MODE
Button once.
One of the BACKLIGHT options will be
blinking at the bottom. Press UP Button /
DOWN Button to select other options as
needed. Press MODE Button to accept
your selection.
Default: 3