Description: Reset all settings and clear
all data (ALL REST)
To Access: From SETTINGS, press the
UP Button / DOWN Button until the cursor
aligns with ALL RST. Press MODE Button
once.
One of the ALL RST options will be
blinking at the bottom. Press UP Button /
DOWN Button to select other options as
needed. Press MODE Button to accept
your selection.
Default: NO
Setup range: YES / NO
Note:
1. By resetting all, all the custom
settings will be erased and all
settings will be reset as default. All
logs will be deleted permanently.
There is no way to retrieve them.
2. Residual nitrogen records will be
cleared and reset. Previous diving
logs will NOT be calculated. Please
make sure you fully understand that
changing this setting will affect
algorithm calculations and the
related risks. DO NOT USE this
function if you are not a certified
diving instructor or you are not
suggested to do so by a certified
diving instructor or facility.
To Next Page
Loading...
