Crestron AM-3200 - Page 8

5 • AirMedia® Series 3 Receivers Product Manual — Doc. 9020C
Configuration
To configure receiver settings using the web configuration interface, deploy multiple receivers
across an enterprise, or enable Modern Authentication for EWS, refer to the following sections:
l
Web Configuration Interface (below)
l
Enterprise Deployment Options (on page70)
l
Modern Authentication for EWS (on page71)
Web Configuration Interface
Configure the AirMedia receiver using the included web configuration interface.
To connect to the receiver and configure its settings, refer to the following sections:
l
Connect to the Receiver (below)
l
Action Menu (on page8)
l
Status (on page15)
l
Settings (on page23)
l
Security (on page61)
l
802.1x Configuration (on page67)
Connect to the Receiver
To connect to the receiver's web configuration interface, a computer must be connected to the
same network as the AirMedia receiver. The web configuration interface is accessible from a web
browser. This interface is also accessible using the XiO Cloud® service.
Supported Web Browsers
When connecting to the receiver's web configuration interface, use one of the supported web
browsers listed below.
Web Configuration Interface Supported Web Browsers
OPERATING SYSTEM SUPPORTED WEB BROWSERS
Windows® operating system Chrome™ web browser, version 31 and later
Firefox® web browser, version 31 and later
Microsoft Edge® web browser, version 86 and later
macOS® operating system Chrome web browser, version 31 and later
Firefox web browser, version 31 and later
Safari® web browser, version 6 and later