Commercial Power Amplifiers Crestron AMP-2210S/3210S
Ear Attachment for Rack Mounting
4. Repeat procedure (steps 1 through 3) to attach the remaining ear to the
opposite side.
Stacking
Four “feet” are provided with the AMP-2210S/3210S so that if the unit is not rack
mounted, the rubber feet can provide stability when the unit is placed on a flat
surface or stacked. These feet should be attached prior to the hookup procedure.
Refer to the following illustration for placement of the feet.
Foot Placement for the AMP-2210S/3210S
NOTE: No more than three AMP-2210S/3210S units should be stacked.
10 Commercial Power Amplifiers: AMP-2210S/3210S Operations & Installation Guide – DOC. 7251A
To Next Page