How to stop Crestron DM-NVX-E30 video flickering from transmitters?
If video is flickering when multiple DM NVX transmitters connect to a network switch, configure the network switch to drop the unknown multicast IP address by setting the IGMP filter.
What causes a stopped DM NVX multicast stream on Crestron?
If a DM NVX multicast stream has stopped, ensure that the multicast address is not a duplicate of a multicast address set on another DM NVX device and that a valid multicast address is used on the DM NVX device.
Why is Crestron DM NVX streaming video not seen in receiver?
If DM NVX streaming video is not seen in the receiver, configure the DM NVX receiver using the correct streaming URL and multicast IP address.
Why does Crestron Media Converter video stop suddenly?
If the video stops suddenly and the IGMP reports disappear in the network switch, configure the IGMP querier correctly. The recommended setting is the default setting of the network switch.
General| Brand | Crestron |
|---|---|
| Model | DM-NVX-E30 |
| Category | Media Converter |
| Language | English |
Provides information about the front and rear panels of the DM-NVX-E30 and DM-NVX-D30 devices.
Describes the connectors, controls, and indicators available on the DM-NVX-E30C.
Describes the connectors, controls, and indicators available on the DM-NVX-D30C.
Details specific to the DMF-CI-8 chassis for DM NVX cards.
Information about managing DM NVX devices via a virtual switching appliance.
Explains how to view statistics on received or transmitted packets and bit rate.
Configuration of multicast TTL to limit or extend hop limit of DM NVX streams.
Configuration of DSCP values for Quality of Service (QoS) in IP networks.
Management of EDID sent to the upstream device connected to the HDMI input.
Configuration of DM NVX encoder subscriptions to DM NVX decoders.
Support for lossless transport of 7.1 surround sound audio formats.
Provides a stereo line-level signal for local sound systems or sound bars.
Allows devices to be managed and configured from a central cloud location.
Incorporates advanced security features for enterprise-grade protection.
Configuration of user and group authentication and access levels.
Configuration and viewing of fan status for DM NVX devices.
Automatic update of the latest firmware at scheduled intervals.
Provides troubleshooting information for DM NVX encoder/decoder issues.
To Next Page
