Crestron DMPS-100 User Manual

DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC
56 • DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC. 7219D
Set the WINS Mode
The DMPS-100/200/300-C can use a WINS server to obtain an IP address. To use a
WINS server:
1. Access the “Network Setup” menu as described on page 54.
2. Press the k or j buttons until WINS is displayed on the LCD and press
ENTER to display the “WINS” menu.
“WINS” Menu
WINS
*On j
3. Press the k and j buttons to toggle between On and Off. The current
setting is indicated with an asterisk (*).
4. To save the setting and return to the “Network Setup” menu, press ENTER.
To cancel the operation and return to the “Network Setup” menu, press
MENU.
View and Set the HostName
The DMPS-100/200/300-C can be recognized by its hostname in a networked
environment. To set the hostname:
1. Access the “Network Setup” menu as described on page 54.
2. Press the k or j buttons until HostName is displayed on the LCD and
press ENTER to display the current “HostName.”
Typical “Hostname” Screen
HostName
DMPS-300-C-00107F050
3. Press ENTER to change the current name. A cursor is placed at the last
character in the name.
HostName Change Screen
DMPS-
300-C
-00107F
050
Del Ins < >
4. Turn the VOLUME control clockwise or counterclockwise (or press the k
or j buttons) to select a new letter (uppercase or lowercase) or number.
Move the cursor by pressing the buttons under the < or > symbols. The
hostname can be up to 64 characters in length. To delete a character,
position the cursor under the character to be deleted and press the button
under Del. To insert a space, position the cursor where the space is to be
inserted and press the button under Ins.
5. To save the new name and return to the “Network Setup” menu, press
ENTER. To cancel the operation and return to the hostname display, press
MENU.

Crestron DMPS-100 Specifications

General

Brand	Crestron
Model	DMPS-100
Category	Projector
Language	English