Crestron HD-MD8X8-4KZ-E - Inputs; Outputs

Web Interface Configuration Guide — Doc. 8908C HD-MD8X8-4KZ-E, HD-MD8X4-4KZ-E, and HD-MD4X4-4KZ-E • 15
Inputs
l
Name: Displays the name of the input source.
l
Sync Detected: Displays Yes if connection is detected or No if connection is not detected.
l
Resolution: Resolution when video with valid resolution is detected. If no video is detected,
the reported resolution will be 0x0@0.
l
Source HDCP: Reports HDCP 1.x or HDCP 2.x when the HDCP source is connected. Reports
Non-HDCP when a non-HDCP source is connected and reports No Signal when no source
is connected.
Outputs
l
Name: Displays the name of the output source.
l
Sink Connected: Displays Yes if connection is detected or No if connection is not detected.
l
Resolution:
o
Displays 0x0@0 when the video signal is not being transmitted. For example, no
HDMI cable is connected.
o
Displays detected resolution when video signal is being transmitted. In the event an
HDMI cable is connected to the display/downstream device, but the device is turned
off, the last detected resolution will be displayed until a new video signal is received.
l
Sink HDCP Capability: HDCP support 1.4 or 2.x.
l
Disabled by HDCP: Yes or No.