Crestron HD-MD8X8-4KZ-E - Access the Web Interface with a Web Browser

2 • HD-MD8X8-4KZ-E, HD-MD8X4-4KZ-E, and HD-MD4X4-4KZ-E Web Interface Configuration Guide — Doc. 8908C
l
Open it directly in a web browser.
l
Open a web browser from within the Crestron Toolbox™ application.
Access the Web Interface with a Web
Browser
1. Enter the IP address of the AVswitcher into a web browser.
NOTE: To obtain the IP address, press the Setup button on the AVswitcher to display
the IP address on the HDMI output. The IP address is displayed for 20 seconds.
2. If you are creating a user account for the first time, do the following; otherwise, skip to
step 3.
a. Enter a username in the Username field.
b. Enter a password in the Password field.
c. Re-enter the same password in the Confirm Password field.
d. Click Create User. The Device Administration page appears.