Crestron TSW-760 User Manual

12 • TSW-560, TSW-760, and TSW-1060 Product Manual — Doc. 7927K
Display Setup
Tap Display Setup on the Setup screen to display the Display Setup screen.
Display SetupScreen
l LCD (Screen)
o
Tap the up and down arrow buttons under Brightness to raise or lower the LCD
display brightness level incrementally from 0 to 100%.
o
Tap On or Off under Auto Brightness to turn automatic brightness on or off for the
display.
o
Tap the left and right arrow buttons on either side of LCD ALS Threshold Value to
adjust the ALS (ambient light sensor) threshold value for switching between high and
low auto-brightness presets on the LCD display.
l Key Backlight
o
Tap Enabled or Disabled under Hard Key Backlight to enable or disable the hard key
backlight.
o
Tap the up and down arrow buttons under Brightness to raise or lower the key
backlight brightness level incrementally from 0 to 100%.
o
Tap On or Off under Auto Brightness to turn automatic brightness on or off for the
key backlight.
o
Tap On or Off under Hard Key Wakes LCD to turn the ability to wake the LCD by
pressing any hard key on or off.
o
Tap the left and right arrow buttons on either side of Key ALS Threshold Value to
adjust the ALS threshold value for switching between high and low auto-brightness
presets on the key backlight.

Crestron TSW-760 Specifications

General

Resolution	1280 x 800 pixels
Touch Technology	Capacitive
Network	10/100 Ethernet
Operating System	Crestron OS
Operating Temperature	32° to 104°F (0° to 40°C)
Memory	2 GB RAM
Display Size	7 in
Wi-Fi	802.11a/b/g/n
Bluetooth	Bluetooth 4.0
Power	PoE (Power over Ethernet)
Mounting	table top mount