Product Manual — Doc. 7927K TSW-560, TSW-760, and TSW-1060 • 43
Settings Tab - Authentication Management
Toggle the Enable Authentication switch to turn authentication for the touch screen on or off.
Authentication is turned on by default.
When authentication is turned on, the web configuration interface prompts the user to enter a
new administrator username and password. After rebooting the touch screen, this username and
password must be entered to access the web configuration utility or to connect to the touch
screen through Crestron Toolbox™ software.
CAUTION: Do not lose the administrator username and password, as the touch screen settings
must be restored to factory defaults to reset the username and password.
Use the following Authentication Management settings to add, delete, and edit touch screen users
and groups.
Current User
Click the Current User tab to view and edit information for the current touch screen user.
Authentication Management - Current User Tab
To Next Page
Loading...
