Crestron TSW-760 User Manual

Product Manual — Doc. 7927K TSW-560, TSW-760, and TSW-1060 • 5
The main Setup screen is displayed (TSW-1060 shown).
TSW-1060 Setup Screen
NOTE:The touch screen also provides a web configuration interface that may be used to view
and configure various touch screen settings. For more information, refer to Web Configuration
(on page27).
The Setup screen shows the IP address, hostname, and MAC address of the touch screen and
provides the following configuration selections:
l Buttons for Ethernet setup, IP table setup, audio setup, display setup, standby timeouts,
application selection, and diagnostics.
l Abutton to toggle system messages on or off
l An About button that provides information about the touch screen.
The functions of each button are detailed in the following pages of this guide.
NOTE: A toolbar is present on the bottom of all setup screens. The toolbar provides a gear
button that may be tapped to return to the Setup screen and a Save & Exit button that may
be tapped to save all settings, to exit the setup screens, and to return to the selected scheduling
application.

Crestron TSW-760 Specifications

General

Resolution	1280 x 800 pixels
Touch Technology	Capacitive
Network	10/100 Ethernet
Operating System	Crestron OS
Operating Temperature	32° to 104°F (0° to 40°C)
Memory	2 GB RAM
Display Size	7 in
Wi-Fi	802.11a/b/g/n
Bluetooth	Bluetooth 4.0
Power	PoE (Power over Ethernet)
Mounting	table top mount