Cryo-con Model 24C Front Panel Operation
Once the entry of numeric data has started, it can be aborted by pressing the Home
key. This will cause the field to be de-selected and its value will be unchanged.
Pressing the ESC ( ), key will exit data entry and restore the field to its previous
value. The key can be used as a backspace.
i Note: Up to 20 digits may be entered in a numeric field. When
digit entry has exceeded the display field width, additional
characters will cause the display to scroll from right to left. When
entry is complete, the updated display field may not show all of the
digits entered because of limited field width, however, the digits are
retained to the full precision of the controller's internal 32 bit
floating point format.
44
To Next Page
Loading...