CryopAL TP-35 - Safety; Symbols Used; Operator Safety

6
2. Safety
2.1 Symbols used
Symbol Meaning
Important
information about using the
equipment. Failure to follow the
instructions given for this point does not
result in danger for the user.
Warning: General danger. In this
manual, failure to observe or
implement the instructions preceded
by this symbol may
cause bodily
harm, or may damage the equipment
and installations.
Name and address of manufacturer.
Mandatory
: Protect your hands using
appropriate personal protection
equipment.
Warning
: Low temperature.
Product reference
Date of
manufacturing
Capacity in liters
Batch number
To maintain perfect operating conditions and ensure
that the equipment is used safely, you must follow the
instructions and take note of the symbols given in this
manual. The tank has been designed for
liquid nitrogen only.
When the device cannot be used in conditions of total
safety, the equipment should be withdrawn from
information about using the
equipment. Failure to follow the
instructions given for this point does not
result in danger for the user.
Warning: General danger. In this
manual, failure to observe or
implement the instructions preceded
cause bodily
harm, or may damage the equipment
Name and address of manufacturer.
: Protect your hands using
appropriate personal protection
: Low temperature.
To maintain perfect operating conditions and ensure
that the equipment is used safely, you must follow the
instructions and take note of the symbols given in this
manual. The tank has been designed for
use with
When the device cannot be used in conditions of total
safety, the equipment should be withdrawn from
service and protected against accidental usage. Full
safety cannot be guaranteed in the following cases:
 The equipment is
visibly damaged.

The equipment no longer works (applies
particularly to accessories).

After prolonged storage in unsuitable conditions.

After severe damage sustained during transit.
2.2
Operator safety
2.2.1
General safety precautions
Only personnel who have fully read this manual
and the safety recommendations (see NH78380)
are authorized to handle and use the apparatus
described in this document.
Like every other system, your apparatus may be
subject to a mechanical
failure. The manufacturer
cannot be held liable for any production losses
subsequent to defective operation of the kind
described above, even during the warranty period.
If the cryogenic tank appears to have an operating
fault when used under normal condi
properly trained and qualified personnel are
permitted to service it. The user must not be
permitted to attempt repairs as this could present
a risk to that person's health and/or safety.
The equipment described in this manual is designed
exclu
sively for use by qualified personnel.
Maintenance operations should only be carried out by
qualified and authorized personnel. To ensure the
safe and correct use of the device during service and
maintenance, it is essential that all personnel observe
standard safety procedures.
service and protected against accidental usage. Full
safety cannot be guaranteed in the following cases:
visibly damaged.
The equipment no longer works (applies
particularly to accessories).
After prolonged storage in unsuitable conditions.
After severe damage sustained during transit.
Operator safety
General safety precautions
Only personnel who have fully read this manual
and the safety recommendations (see NH78380)
are authorized to handle and use the apparatus
described in this document.
Like every other system, your apparatus may be
failure. The manufacturer
cannot be held liable for any production losses
subsequent to defective operation of the kind
described above, even during the warranty period.
If the cryogenic tank appears to have an operating
fault when used under normal condi
tions, only
properly trained and qualified personnel are
permitted to service it. The user must not be
permitted to attempt repairs as this could present
a risk to that person's health and/or safety.
The equipment described in this manual is designed
sively for use by qualified personnel.
Maintenance operations should only be carried out by
qualified and authorized personnel. To ensure the
safe and correct use of the device during service and
maintenance, it is essential that all personnel observe