How to improve signal strength on my CSL DualCom Pro Security System?
To improve the signal strength of your CSL Security System, avoid coiling the aerial cable. Also, move the aerial away from electrical equipment or wiring and to a higher point in the property or closer to a window or door.
Use Signal Analyser or power up device to check signal strength.
Ensure LAN port, connect Ethernet cable, check router settings.
Instructions on where to install the aerial for optimal signal.
Details the function and status of LEDs 1, 2, and 3 during initial power up.
How to change input configuration from negative removed to negative applied.
Details serial cable compatibility for various alarm panel manufacturers.
Method for testing DualCom Pro paths with the ARC and control equipment.
Ensuring both paths are connected on dual path devices before leaving site.
List of features available via the My Base App or Web portal.
Details the MENU, MESSAGE, DESCRIPTION, and CONFIGURABLE status for device buttons.
Procedure to fail primary and secondary signalling paths using menu options.
Meaning of the flashing dot in the right-hand corner of the display.
Methods to check signal strength of each radio module via My Base App or DIP switch.
Tips for improving signal strength, including aerial placement and module enclosures.
Physical dimensions and weight of the DualCom Pro units.
Details on operating temperature, humidity, and mounting requirements.
Power requirements, current consumption, and radio path specifications.
List of standards and classifications the DualCom Pro complies with.
Contact details for UK and Ireland technical support, including phone and email.
Information on obtaining the latest manuals and product details from the CSL website.
General| Category | Security System |
|---|---|
| Power Supply | 12V DC |
| Operating Temperature | -10°C to +55°C |
| Monitoring | 24/7 monitoring via ARC |
| Primary Path | GPRS |
| Secondary Path | IP |
| Signalling Format | Contact ID |
| Communication | GPRS/IP |
| Battery Backup | Yes |
| Compatibility | Compatible with most alarm control panels |
| Encryption | AES-128 |
| Certifications | EN50136 |
| Type | Dual Path Alarm Communicator |
To Next Page
