Need help?Do you have a question about the CTC Union FRM220 Series and is the answer not in the manual?
Step-by-step guide for inserting the line card into the CH01 chassis and securing it.
Guide for inserting the line card into the CH01/xx chassis and securing it with a thumb screw.
Explains AC and DC power connections for the CH01-AD, including redundant supply configuration.
Guide for inserting the line card into the CH01M/xx chassis and securing it with a thumb screw.
Describes installing a double width blade line card into the chassis, including management console connection.
Details installing a single width blade line card into the chassis with local management.
Explains installing two single width blade line cards into the chassis for local management.
Details installing a single module line card and NMC card into the FRM220-CH02/SMT chassis.
Describes installing a single width blade line card plus an NMC card into the FRM220-CH02/NMC chassis.
Lists the necessary tools for installing the FRM220-CH04A, including screwdrivers and grounding equipment.
Guides on preparing the installation site, including AC outlet access and required clearance.
Details the mechanical aspects of chassis installation, including rack mounting and adapter placement.
Details the process of installing the NMC card into slot number 1 of the chassis.
Describes the hot-swappable installation and removal of media converter line cards.
Lists the necessary tools for installing the FRM220-CH08, including screwdrivers and grounding equipment.
Guides on preparing the installation site, including AC outlet access and required clearance.
Details the mechanical aspects of chassis installation, including rack mounting and adapter placement.
Explains AC and DC power connections, emphasizing proper polarity and grounding for safe installation.
To Next Page
General
