110
2-2). Port Configuration
After VLANs are created, assign ports to VLANs.
There are three types for a port - Normal, Host, and Promiscuous.
“Normal” is for ports doing normal 802.1Q operation instead of Private VLAN.
“Host” is for ports that could be in Community VLAN or Isolated VLAN.
“Promiscuous” is for ports that could be in Primary VLAN or Isolated VLAN.
Follow the steps to do the port assignment.
a. Select the type for a port.
b. If it is “Host”, you can select a VLAN from Community VLAN or mark Isolated
VLAN and select from it. (Community VLAN must be associated first.)
c. If it is “Promiscuous”, you can select a VLAN from Primary VLAN or mark
Isolated VLAN and select from it.
d. Repeat a.~c. to complete the port assigment.
e. Click [Apply].
Please see the following picture.