CTC Union GSW3208M User Manual

84
6.4.2 SNMP
This function is used to configure SNMP function of the switch. This switch
supports SNMP v1, v2c, and v3 agent function and MIB II(Interface), Bridge MIB,
802.1Q MIB and Private MIB.
[System Information]
Object ID: this is the SNMP Object ID of the switch for SNMP management.
Up Time: this is the power-up running time of the switch.
Version: this is used to select SNMP agent operation version.
Name: this the host name of the switch.
Contact: this is the contact information for the switch.
Location: this is the location information of the switch.
[SNMP -- Communities]
Get: this is the community string of GET command for SNMP operation. GET
command is used to read switch configuration/information.
Set: this is the community string of SET command for SNMP operation. SET
command is used to set switch configuration.

CTC Union GSW3208M Specifications

General

Brand	CTC Union
Model	GSW3208M
Category	Network Router
Language	English