86
6.4.3 Security
This function is used to configure security functions of the switch. Those security
functions are Administrator Management Security, Mac ID Access Security, and
802.1x Authentication Security.
1). User Accounts (Administrator Management Security)
Administrator Username/Password : This is for network administrator to
change his/her username and password. (Default is admin/admin.)
Guest Username/Password : This is used to setup the username/password of
guest-right user who just can view the setting of the switch.
Authentication : This is used to setup the authentication manner for
administrator of the switch when login by http(s)/telnet for management. It could
be authenticated by local switch or by RADIUS Server.
- local: authenticated by local switch
- radius: authenticated by RADIUS Server
- local, radius: authenticated by local switch first. If authentication fail,
try by RADIUS Server next
RADIUS Server is set in 802.1x function.
[Security Policy]
To Next Page
Loading...
