CTC Union GSW3208M User Manual

13
4. Adding Module
This switch supports SFP (for 1000SX/LX/…) connectors for gigabit ports.
Because the SFP slots support hot-swap function, you can plug/unplug the SFP
transceiver to/from the SFP slot directly. The switch can auto-detect the gigabit
connection from SFP slot.
Follow the steps for module adding and removing.
[ Add SFP Transceiver ]
1. Plug in the SFP Transceiver to SFP slot directly.
2. Connect network cable to the SFP Transceiver. If the connected devices are
working, the Link/Act LED will be ON.
[ Remove SFP Transceiver ]
Unplug the SFP Transceiver from SFP slot directly.

CTC Union GSW3208M Specifications

General

Brand	CTC Union
Model	GSW3208M
Category	Network Router
Language	English