CTC Union GSW3208M User Manual

61
6.2.6 Show Commands
Show command is put in General Basic Commands for viewing system
configuration and information.
Enter “show ?” at the prompt, the sub-command list will be shown.
----------------------------------------------------------------------------------------------
# show ?
aaa Show AAA service configuration
calendar Date and time information
dhcp-relay DHCP Relay Configuration
dot1x 802.1x content
gvrp GVRP configuration
history History information
interface Interface information
ip IP information
ip-filter IP Filter Configuration
lacp LACP statistics
line TTY line information
log Log records
mac-address-table Configuration of the address table
mac-security MAC Security Configuration
management Management IP filter
map Maps priority
mvr Show MVR Status
port Port characteristics
queue Priority queue information
radius-server RADIUS server information
running-config Information on the running configuration
rate-limit Configures rate-limits
snmp Simple Network Management Protocol statistis
sntp Simple Network Time Protocol configuration
spanning-tree Spanning-tree configuration
system System information
trunk Trunk information
version System hardware and software versions
vlan Virtual LAN settings
----------------------------------------------------------------------------------------------
1. show aaa authentication login command
This command will show the authentication settings for admin of the switch
when login for management. It could be authenticated by local switch or
RADIUS Server, or local switch first RADIUS Server next.
For example,
# show aaa authentication login
Authentication:
local

CTC Union GSW3208M Specifications

General

Brand	CTC Union
Model	GSW3208M
Category	Network Router
Language	English