62
2. show calendar command
This command will show current system time.
For example,
# show calendar
Current Time : 2008/08/29-11:27:12
3. show dhcp-relay command
This command will show current DHCP Relay/Option 82 settings.
For example,
# show dhcp-relay
DHCP Relay Configuration
DHCP Relay Status: Disable
Add additional option82 information: Disable
Relay Agent information:
DHCP Server IP Address:
4. show dot1x command
This command is used to show 802.1x configuration and status.
show dot1x command is used to show current 802.1x configuration and status
of each port. For example,
# show dot1x
[Port Authentication Configuration]
Port Status Authentication Mode
1/1 Force-Authorized
1/2 Force-Authorized
1/3 Yes Force-Authorized
1/4 Force-Authorized
1/5 Force-Authorized
1/6 Force-Authorized
1/7 Force-Authorized
1/8 Force-Authorized
1/9 Force-Authorized
1/10 Force-Authorized
show dot1x configuration command is used to show 802.1x configuration and
status of the switch. For example,
# show dot1x configuration
[802.1x Configuration]
802.1x System Authentication Status: Disable
Re-authentication: Disable
Re-authentication Timeout Period : 3600 seconds
Re-authentication Max Count: 2
Max Request Count: 2
Server Timeout Period: 30 seconds
Supplicant Timeout Period: 30 seconds
Quiet Timeout Period: 60 seconds
Tx Timeout Period: 30 seconds
To Next Page
Loading...
