99
About Port Security function . . .
You can configure “Mac Security Configuration” function (in “Security” page) for
port access security with Mac address. Select “Accept” for such security
application..
2). Dynamic Addresses
This function can show the dynamic Mac addresses learned by the switch. This
table will refresh every 30 seconds.
The address table could be more than one page. You can click [Previous Page],
[Next Page] to change page. Or, give the page number directly.
Query function is supported by the switch. It could be queried by Port or queried
by Mac Address. Select the query function and input the query target. Then click
[Query]. The result will be shown.
For example,
To Next Page
Loading...
