Need help?Do you have a question about the Ctronics CTIPC-260CWS and is the answer not in the manual?
General| Lens | 3.6mm |
|---|---|
| Audio | Two-way audio |
| Weatherproof Rating | IP66 |
| Motion Detection | Yes |
| Night Vision | Up to 20m (65ft) |
| Connectivity | Wi-Fi 2.4GHz |
| Storage | MicroSD up to 128GB |
Lists conditions not covered by warranty, including unauthorized repair, misuse, and force majeure.
Covers 4-inch appearance, stable operation, advanced IR LED, adaptive protocols, and overall product features.
Details power supply, PTZ rotation, speeds, and environment specifications like temperature and humidity.
Covers address range, communication, protocols, baud rates, controlling equipment, and preset capabilities.
Details product installation and matching device components like brackets and cables.
Details setting address codes (1-255) using binary dial switches (ON=1, OFF=0).
Explains setting baud rates (2400-19200bps) and mentions protocol settings.
Explains storing and recalling camera positions via controlling equipment and provides an example for setting Preset No.1.
Describes how to recall preset positions using controlling keyboard or DVR, with an example.
Explains auto tour, calling routes, stay time settings, and provides examples for starting tours.
Details setting left/right limit positions and initiating 355° horizontal scanning.
Defines pattern scan, references settings, explains clearing cruise routes, and provides examples.
Details setting pattern scan points, starting scans, and clearing scan settings.
Command to restore the device to its original factory default settings.
Fast call commands for IR control, OSD menu, system settings, and home position management.
Fast call commands for running tour sequences and scanning functions.
Details fast call commands for A-B scan sequences and setting their limit positions.
Details fast call commands for pattern scan sequences and recording scan tracks.
Commands for locking/releasing PTZ movement and managing recovery control time.
Command to open the camera menu and its associated navigation options (Zoom, Focus, Iris).
Fast call commands for running auto tour sequences 1, 2, and 3.
Fast call commands for running auto tour sequences 4 through 8.
Details fast call commands for A-B scan sequences 1 and 2 and their limit settings.
Fast call commands for A-B scan sequences 3 through 8.
Commands to set left and right limits for A-B scan sequences 3 through 8.
Fast call commands for running pattern scan sequences 1 through 8.
Commands to start and end recording scan tracks for pattern scan sequences 1 through 8.
Covers power supply, safety, operational tips, IR function, and general warnings.
Details outdoor operation temperature ranges for intermittent and continuous use.
Note that product parameters are subject to update without prior notification.
To Next Page
