Cub Cadet 7530

Maintenance Standard 1
3
(Unit : mm {in})
Item Standard Value Limit Value Remarks
Assembly of axle shaft
Backlash for axle shaft bevel gear
12T and 32T
0.20 to 0.40
{0.008 to 0.016}
Clearance bet. front axle shaft bearing and ring
0 to 0.20
{0 to 0.008}
Assembly of knuckle arm
Clearance bet. knuckle arm and
holder
0.05 to 0.20
{0.002 to 0.008}
Clearance of bush
Clearance bet. holder and front bracket
0.03 to 0.065
{0.0012 to
0.0026}
0.20
{0.008}
Clearance bet. holder and rear bracket
0.03 to 0.08
{0.0012 to 0.003}
0.20
{0.008}
Clearance bet. kingpin case and bush
0.03 to 0.08
{0.0012 to 0.003}
0.20
{0.008}
Clearance bet. holder and bush
0.03 to 0.06
{0.0012 to 0.002}
0.20
{0.008}
Clearance bet. holder and knuckle arm
0.05 to 0.20
{0.002 to 0.008}
0.20
{0.008}
Steering
Toe-in (A to B)
0 to 10.0
{0 to 0.39}
Free play for steering wheel
20 to 50
{0.79 to 1.97}
Circumference
Cutting angle of final case
Inner angle 60°
0
-2°
Outer angle 53°
0
-2°
Angle of kingpin 10°
Camber 2°30'
Caster 3° 3°
www.mymowerparts.com
K&T Saw Shop 606-678-9623 or 606-561-4983