Cub Cadet Challenger 550 User Manual

5‐51
Chassis
Front Suspension components
1. Inspect the front A arms.
Look for bends or damage.
2. Inspect the middle bushing.
Look for wear or damage.
3. Inspect the upper ball joint
Look for pitting or damage.
Inspect for free play and
smoothness of operation.
Front Shock Absorbers
1. Inspect the shock absorber rod.
Look for bends, corrosion or
damage.
2. Inspect the shock absorber
body.
Look for oil leaks.
3. Inspect the spring.
Look for fatigue.
Installing the front A arms and shock
absorbers
1. Install both the upper arm (1) and
the lower arm (2).
Note:
Lubricate the bolts (3) with lithium
grease, and position them with the bolt
heads facing outward. Temporarily
install bolt (4) loose.
2. Install the front shock absorbers(5)
Nut(6)
60-72 Nm (44-53 ft · lbs)
3. Install the ball joints
Nut (7)
40-50 Nm (30-37 ft · lbs)
4. Install new cotter pins, and tighten
the nuts (4).
Nut (4)
60-72 Nm (44-53 ft · lbs)

Cub Cadet Challenger 550 Specifications

General

Brand	Cub Cadet
Model	Challenger 550
Category	Utility Vehicle
Language	English