•
placing the rear wheel under it so that the
chain is over the smallest sprocket
•
Carefully lower the rear of the bike until the
axle is at the dropout stop on the right and
left sides.
b) To assemble the front wheel
•
Lift up the bike by the handlebars,
•
Placing the front wheel under the front forks
dropouts and
•
Carefully lower the forks until the axle is
ush at the dropout stops on the right and
left sides.
2. Tighten the wheel hubs.
•
When tightening with quick releases: see
Chapter 8.8
3. Close rim brakes
a) On racing bike brakes:
Shimano und Sram:
•
Move the lever downwards.
b) Campagnolo:
To Next Page
Loading...
