CDR-3250/80 TECHNICAL MANUAL
3-12 Issue 2.2
MODE - NEXT Soft Key Menu.
ISB FM FSK CANCEL
MTR
MNU
NEXT
When FSK is selected, the following menu appears.
MODE - NEXT - FSK Soft Key Menu.
VNAR NAR MED WIDE CANCEL
MTR
MNU
NEXT
Press the desired FSK shift value where VNAR = 50 Hz, NAR = 85 Hz, MED = 170 Hz, and WIDE = 850 Hz.
3-7.2.3 Bandwidth.
This function sets or changes the receiver bandwidth.
NOTE
In ISB mode the bandwidth is fixed at 2.8 kHz. In USB, LSB, or CW, only bandwidths between 100 Hz and 6.0
kHz can be selected. In AM or FM modes all bandwidths between 100 Hz and 16.0 kHz may be selected.
Primary Soft Key Menu.
FREQ MODE BW SQELCH GAIN
MTR
MNU
NEXT
Press BW to change the bandwidth. The following menu appears.
BW Soft Key Menu.
300* 1.0* 2.8* 6.0* CANCEL
MTR
MNU
NEXT
Press the desired bandwidth key or press the NEXT key to display additional bandwidths.
BW - NEXT Soft Key Menu.
600* 2.0* 8.0* TABLE CANCEL
MTR
MNU
NEXT
Press the desired bandwidth key or press the TABLE key for additional bandwidths.
*Operator assignable value. May be different than shown.
Courtesy of http://BlackRadios.terryo.org
To Next Page
Loading...