picture, a “worm” will be displayed and the LED will
fl ash red and green – do not remove the SD card until the
LED is OFF. After the image is saved to the SD card, the
LCD will display the delay setting and begin counting
down. Once the counter reaches 0,
Cuddeback
®
IR
is
armed and ready to record the next picture.
Step 7: Checking
Cuddeback
®
IR Display
Information
When you need to check for information such as battery
level or the number of images on the SD card,
it is not
necessary to turn the
rotary knob. Instead, press the A or
B button to temporarily
suspend Armed mode. Each time
you press the A or B button, new information will be
displayed in this sequence:
1. Images on SD card. Note the ARMED, DWELL,
and IMAGES icons are displayed.
2. Free Space on SD card in MB. Note that ARMED
and DWELL icons are displayed.
3. Battery Level as a percentage. For example,
bt:99 means there is 99% battery power left.
4. Time
5. Date
6. Year
7.
Test indicates Cuddeback
®
IR is in Test mode and will
illuminate the red Test LED when activity is sensed.
8. Pressing A or B again will arm the camera and
the current delay setting will be displayed.
8
To Next Page
Loading...
