Cuddeback IR - Viewing Images

Viewing Images
You will need an external viewing device or computer to
view images. First, remove the SD card from the camera.
Make sure to remove the SD card only when the worm is
not visible. Here is a list of some viewing options.
1. You can view the images with an optional viewer
or a point-and-shoot camera that is able to read
Cuddeback
®
IR ’s images (Note: Not all SD-based
cameras
can view Cuddeback
®
IR’s images.
Please test any camera before purchasing).
2. Replace the SD card with a fresh SD card and take
the
original SD card with you to view on your PC
or other device.
3. Cuddeback’s CuddeView
®
viewer will allow you to
view the images, copy the images to a second SD
card and erase the images from the SD card. You
can then put the original SD card back into any
Cuddeback
®
camera. CuddeView
®
allows you to
transfer images from multiple cameras to a single
SD card. Go to www.cuddeback.com for
more
information on CuddeView
®
. (Note: CuddeView
®
may not be able to copy all the images taken in
Guard Duty mode. If you are using Guard Duty,
we recommend you view the images on a computer.)
13