You can leave Cuddeback
®
IR in any of the states 1
through 7 and Cuddeback
®
IR will automatically re-arm
in about fi ve minutes. This allows you to close the cover
and leave the area without triggering an image.
Step 8: Using More Features
Menu Position
Turn the rotary knob to the MENU position to perform
various activities. Press A to advance to the next menu
item; press B to activate the displayed menu action.
1. Battery Level – The battery level is displayed in the
format bt:99, which is a percentage of remaining
battery power. Press the A button to advance to the
next menu item.
2. CLr (Clear SD card) – This menu allows you to
clear all images and content on the SD card. Press
and hold B to clear
the card. The worm will appear
and the LEDs will fl ash RED.
When fi nished, the
LCD will display the amount of space on the SD
card in MBs. Press A to advance to the next menu item.
3. Pic – Lets you take a test picture. Press B to take
a picture. Press A to advance to the next menu item.
4. LEd – This menu allows you to test Cuddeback
®
IR
LEDs and measure the battery strength. Press B to
test Cuddeback
®
IR infrared LEDs. The LEDs will
be driven from 33% minimum power to 99%
maximum power. The test will stop at 99% or when
the batteries do not have suffi cient power to drive
the LEDs. If the batteries are depleted, FAIL will be
9
To Next Page
Loading...
