• Battery life using Guard Duty will be less than
in other modes, perhaps as low as 1 week if 5
images a minute is selected. Choosing fewer
images per minute will extend operating time.
•
We recommend you use our Trophy Room PC program
to view Guard Duty images. Available for free at
www.cuddeback.com.
Time-Lapse Mode
Time-Lapse mode records images 24 hours a day at a
preset interval from 1 hour to 24 hours.
• To enable Time-Lapse, set P0 to tL and set the
rotary dial to one of the right (video on) positions.
Settings are 1, 3, 6, 12 and 24 hours.
• Time-Lapse will record images 24 hours a day.
At night illumination (fl ash or LEDs) are used.
•
Motion sensing is disabled when Time-Lapse is enabled.
To disable Time-Lapse Mode, set P0 to P0:0 or P0:1.
Appendix B: Firmware
We never stop improving our products. Firmware updates
allow your camera to be improved with enhanced performance
and new features. We strongly recommend you visit our
website prior to camera deployment to check for rmware
updates.
Updating your Cuddeback camera rmware is a
2-step process: 1) retrieving rmware from the Cuddeback
website, and 2) loading the rmware onto your camera.
23
To Next Page
Loading...
