Step 10:
Press the A key to display PA (burst mode)
Set PA from 1 thru 5 to set the number of images taken
with each trigger.
Time-Lapse / Guard Duty Mode (P0= tL)
Time-Lapse / Guard Duty mode is enabled when Parameter
0 is set to tL. When P0 is set to tL, the rotary dial enables
Time-Lapse or Guard Duty.
Guard Duty
Guard Duty allows you to constantly monitor a fi eld or
other location by continually taking pictures at a selected
interval of 1 to 5 images per minute.
• To enable Guard Duty, set P0 to tL and set the
rotary dial to one of the left (video off) positions.
Settings are 1 to 5 images per minute (60, 30, 20,
15 and 12 seconds).
• Guard Duty takes images only during daylight.
•
At night, Cuddeback
®
will revert to motion sensing
mode and take pictures of animals as they are
detected. The camera delay will default to
15 seconds.
• Guard Duty images are 1.3 MP and are saved in
the folder
DCIM\200CUDDY.
• Guard Duty will record thousands of images per
day. We recommend 8GB SD cards or bigger.
22
To Next Page
Loading...
