18
01045704 A 09/24
These simple precautions, if followed, will help assure continued trouble-free service and keep your Culligan Water
system looking like new for years�
• Use only mild soap and warm water when cleaning the exterior of the conditioner� Never use harsh,
abrasive cleaning compounds or those which contain acid, such as vinegar, bleach and similar products�
• Important: Protect your water system from freezing temperatures�
WARNING!
If your unit should freeze, do not attempt to disassemble it. Call your Culligan Dealer.
• Important: Culligan water systems are sold for use with potable water, only� If at any time the water becomes
contaminated, such as during a “boil water” situation, the operation of the water system should be discontinued
until it is verified that the water is again potable� To do this, turn the knob on the bypass valve to the bypass position
for both tanks� Then, call your Culligan dealer to have your system sanitized before it is placed back into service�
• Should service, adjustment, or trouble-shooting information be needed which is not covered in this Owners Guide,
call your Culligan Dealer�
If you have further questions, please call your local independently operated Culligan dealer� Your Culligan dealer will be
glad to be of assistance to you�
PFAS Water Testing
Periodic PFAS water testing may be desirable under the following conditons:
• To check the PFAS levels of the source water supply
• To verify PFAS reduction performance of a PFAS filter system
• To determine or verify that PFAS filter media is in need of replacement
The Culligan low-cost PFAS test kit can identify 55 different PFAS compounds� Contact your local Culligan Dealer for details�
Figure 5� Culligan Low-Cost PFAS Test Kit
Care and Cleaning of Your Water System
To Next Page
Loading...
