Culligan Aquasential Whole Home PFAS Water Filter
Culligan knows the more informed you are about your water treatment systems, the more confident you will be about its performance� It’s because
of this and more than seventy years of commitment to customer satisfaction that Culligan is providing this Performance Data Sheet to its customers�
NOTE! Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs.
It is recommended that before purchasing a water treatment unit, you have your water supply tested to determine
your actual water treatment needs.
Manufacturer: Culligan International Company
9399 W� Higgins Rd�, Suite 1100
Rosemont, IL 60018 USA
(847) 430-2800
www�culligan�com
Product: Culligan Aquasential Whole Home PFAS Water Filter
Models: Aquasential Whole Home PFAS Water Filter Fiberglass Indoor, Aquasential Whole Home PFAS Water Filter Fiberglass Outdoor,
Aquasential Whole Home PFAS Water Filter Quadra-Hull Indoor, Aquasential Whole Home PFAS Water Filter Quadra-Hull
Outdoor, Aquasential Whole Home PFAS Water Filter Fiberglass Indoor, French, and Aquasential Whole Home PFAS Water
Filter Quadra-Hull Indoor, French
Testing Conditions & Results:
Capacity: 158,000 gallons
Service Flow Rate: 7�5 gpm @ 7�5 psi
Operating Conditions:
Operating Temp� Range: 33 - 120°F (1 - 49°C) Water Press� Range: 20 - 120 psi (138 - 862 kPa)
Electrical Characteristics: 24 VDC, 1 Watt Water Press� Range (Canada): 20 - 90 psi (138 - 621 kPa)
NSF/ANSI Standard 53
Substance Reduction
Testing was performed under standard laboratory conditions, actual performance may vary This system has been tested according to
NSF/ANSI 53 for reduction of the substances listed below� The concentration of the indicated substance in water entering the system
was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 53�
Name of
Substance
Influent
Challenge
Concentration
mg/L / ppm
Influent
Challenge
Concentration
ng/L / ppt
Maximum Permissible
Product Water
Concentration
mg/L / ppm
Maximum Permissible
Product Water
Concentration
ng/L / ppt
Flow Rate =
7.5 gpm
Average
Reduction
Total PFAS¹ 0�00216 mg/L ± 20% 2160 ng/L ± 20% 0�00002 mg/L 20 > 99�9%
PFOA 0�0005 500 0�00002 mg/L 20 > 99�9%
PFOS 0�001 1000 0�00002 mg/L 20 > 99�8%
PFHxS 0�0003 300 0�00002 mg/L 20 > 99�9%
PFHpA 0�00004 40 0�00002 mg/L 20 > 99�9%
PFNA 0�00005 50 0�000006 mg/L 6 > 99�9%
◊ PFBS 0�00026 260 N/A N/A > 99�9%
◊ PFDA 0�00001 10 N/A N/A > 99�9%
◊ PFBS and PFDA do not have maximum permissible concentration levels per the NSF/ANSI 53 standard. PFBS is lower than the EPA Hazard Index
and PFDA does not have an EPA maximum contaminant level� PFBS and PFDA were included in the Total PFAS testing and were found to be at non-detect levels�
The Culligan Aquasential Whole Home PFAS Water Filter Fiberglass Indoor, Aquasential Whole Home PFAS Water Filter Fiberglass Outdoor,
Aquasential Whole Home PFAS Water Filter Quadra-Hull Indoor, Aquasential Whole Home PFAS Water Filter Quadra-Hull Outdoor, Aquasential
Whole Home PFAS Water Filter Fiberglass Indoor, French, and Aquasential Whole Home PFAS Water Filter Quadra-Hull Indoor, French are tested
and certified by WQA to NSF/ANSI/CAN 372, CSA B483�1, and NSF/ANSI 53 for Total PFAS¹ reduction as verified and substantiated by test data�
¹ Including: PFBS; PFDA; PFHpA; PFHxS; PFNA; PFOA; PFOS
CAUTION!
Do not use with water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after installing the system.
Buyer Signature _______________________________________________________________________ Date ____________________
Seller Signature _______________________________________________________________________ Date ____________________
19
01045704 A 09/24
Performance Data Sheet
To Next Page
Loading...
