EasyManua.ls Logo

Culligan Aquasential - Specifications

Culligan Aquasential
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Operating and Regulatory Specifications
In order to meet regulatory conditions, some operational parameters must be followed�
They include:
1� An operating water pressure between 22 and 125 psi (1�5–8�62 Bar)� Culligan recommends following the IAPMO
Uniform Plumbing code section 806�2 by installing a Pressure Regulating Valve if the water pressure is greater than 80
psi� Operating on pressures above the UPC for extended periods of time can increase the service frequency and failure
of replacement parts� On a private water system, make sure the minimum pressure (when the pump starts) is greater
than 20 psi (140 kPa)�
2� Operating temperature between 33° and 120°F or 0�5°–49°C�
3� Clear (non-turbid) water supplies (Less than 5 NTU)�
4� Using non-Culligan branded media or media from other sources or different amounts voids WQA certification�
5� To maintain WQA certification and continued PFAS reduction performance, use only Culligan supplied filter
medias specified in this manual�
Table 1� System Specifications�
Culligan Aquasential Whole Home PFAS Filter Systems
Indoor Indoor Outdoor Outdoor
Fiberglass Quadra-Hull Fiberglass Quadra-Hull
Smart Flow Monitor Indoor Indoor Outdoor Outdoor
Tank Closure In/Out Head In/Out Head In/Out Head In/Out Head
Tank Size - Tank #1 10" x 54" 10" x 54" 10" x 54" 10" x 54"
Tank #1 - Media Calgon F600 GAC Calgon F600 GAC Calgon F600 GAC Calgon F600 GAC
Tank #1 - Media Volume 2�0 cu�ft� 2�0 cu�ft� 2�0 cu�ft� 2�0 cu�ft�
Tank #1 - Underbedding Cullsan, 20 lb Cullsan, 20 lb Cullsan, 20 lb Cullsan, 20 lb
Tank #1 - Overall Height 59" 59" 59" 59"
Tank Size - Tank #2 10" x 54" 10" x 54" 10" x 54" 10" x 54"
Tank #2 - Media Cullex PFAS Anion Cullex PFAS Anion Cullex PFAS Anion Cullex PFAS Anion
Tank #2 - Media Volume 1�5 cu�ft� 1�5 cu�ft� 1�5 cu�ft� 1�5 cu�ft�
Tank #2 - Underbedding Cullsan, 20 lb Cullsan, 20 lb Cullsan, 20 lb Cullsan, 20 lb
Tank #2 - Overall Height 60" 60" 60" 60"
Rated Service Flow @
Pressure Drop
7�5 gpm @ 7�5 psi 7�5 gpm @ 7�5 psi 7�5 gpm @ 7�5 psi 7�5 gpm @ 7�5 psi
Operating Pressure 20-120 psi 20-120 psi 20-120 psi 20-120 psi
Operating Pressure - Canada 20-90 psi 20-90 psi 20-90 psi 20-90 psi
Operating Temperature 33 - 120 F 33 - 120 F 33 - 120 F 33 - 120 F
Electrical Requirements 24 VDC, 1W 24 VDC, 1W 24 VDC, 1W 24 VDC, 1W
Electrical Power Consumption 0�5W / 1�0W 0�5W / 1�0W 0�5W / 1�0W 0�5W / 1�0W
pH Range 6�0 to 8�5 6�0 to 8�5 6�0 to 8�5 6�0 to 8�5
Iron <0�30 mg/l <0�30 mg/l <0�30 mg/l <0�30 mg/l
Manganese <0�05 mg/l <0�05 mg/l <0�05 mg/l <0�05 mg/l
Hardness < 10 gpg < 10 gpg < 10 gpg < 10 gpg
Hydrogen Sulfide None None None None
TOC - Total Organic Carbon < 2�0 mg/l < 2�0 mg/l < 2�0 mg/l < 2�0 mg/l
Turbidity 5 NTU 5 NTU 5 NTU 5 NTU
Sulfate 200 mg/l 200 mg/l 200 mg/l 200 mg/l
Chloride 100 mg/l 100 mg/l 100 mg/l 100 mg/l
* Total PFAS 0�00216 mg/L ± 20% 0�00216 mg/L ± 20% 0�00216 mg/L ± 20% 0�00216 mg/L ± 20%
* Including: PFBS; PFDA; PFHpA; PFHxS; PFNA; PFOA; PFOS� See the "Performance Data Sheet" on page 19 for details�
7
01045704 A 09/24
Specifications

Related product manuals