CUMMINS ALLISON JetScan iFX i100 - Operating Modes

10 | JetScan iFX
®
i100 scanner | Getting started
Operatingmodes
Pressing MODE from the main screen displays all modes that have been enabled in
SETUP and are available for use. The following screen shows all modes enabled. Each
mode is described in the table.
Modekey Description
STRANGER
Scans for the rst denomination processed, which is the
target, and stops when another denomination is found. When
the machine encounters a different denomination, it is called
a stranger. A grand total is provided.
MIXED
Scans all denominations without presorting. A grand total by
denomination is provided.
SORT
Scans all denominations and stops when a denomination
changeoccurs.Bestusedwhennotesarepresortedby
denomination and then stacked together. A grand total is
provided.
COUNT
Counts any type of media that complies with document size
and density-setting specications. This mode only counts
pieces; document scanning does not occur.
FACE
When FACE is selected in addition to STRANGER, MIXED
or SORT mode, the machine stops when it detects a non-
faced document. The rst document processed determines
the facing.
ORIENTATION
When ORIENTATION is selected in addition to STRANGER,
MIXED or SORT mode, the machine stops when it detects
a non-oriented document. The rst document processed
determines the orientation.