CUMMINS ALLISON JetScan iFX i100 - Check Order Integrity Process

Check order integrity process | JetScan iFX
®
i100 scanner | 25
Check order integrity process
This section shows an example of an error recovery process that maintains check
item order. For complete check conguration options, consultaCumminsAllison
representative.
Condition The MISS-FEED DETECTED screenshownbelowappearswhenBANK
AND PRESENT is ON and any error that requires checks to be reprocessed occurs.
ThePIGGYBACKDETECTEDscreenisshownbelowasanexampleoferrorprocessing
when ORDERED RECOVERY is ON. Detailed instructions appear on the screen to guide
users through the check order integrity process so that the original item order is
maintained.
When ORDERED RECOVERY is OFF, the check item processing order is not important
and detailed instructions for maintaining the original item order are not provided on
the screen.
Action To clear a MISS-FEED DETECTED screen when ORDERED RECOVERY is ON,
follow these procedures:
1. Empty the pocket as instructed on the
screen. Remove checks from the
pocket and bank them.
2. The machine feeds the error into the
pocket.
3. The screen displays the type of
miss-feed that was detected. A
PIGGYBACKDETECTEDscreenis
shown in this example at right.
These screens only appear on machines with:
•Thecheckcaptureoption.
•ORDEREDRECOVERYONinCHECKSETUPMENU2.
•BANKANDPRESENTONinCHECKSETUPMENU2.
•ACCEPTDOUBLESONinCHECKSETUPMENU2.
3
1