INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. Fishwire the 1/2" bolts and CM-SP12 Spacers
supplied into the forward hole above the cross
beam. Raise hitch into position and loosely
install 1/2" flange nuts and the 12mm bolts
removed in step 1 for the cross beam inserts.
4. Torque all 12mm fasteners to 86 lb-ft and all 1/2"
fasteners to 110 ft-lb.
To Next Page
Loading...
