CURTMFG.COM
•
PRODUCT SUPPORT: 877.287.8634
•
58266-INS-RB
•
02/18/2021
•
ECN7915
•
PAGE 3
Step 5
Open the inner tailgate panel by
pressing the upper button on the tailgate.
Starting on the passenger side, use
a 1/2" socket to remove the four tailgate
and multi-function locking mechanism
fasteners. Remove the outer tailgate locking
mechanism fasteners (main tailgate) first,
followed by the inner tailgate mechanism
fasteners (multi-function feature).
Step 4
Using a Torx T-20 bit, remove the 10 screws
in the main part of the tailgate as shown.
Lift the plastic panel closest to the truck bed
up and locate the single push fastener in the
center of the panel. Remove the push fastener
using a trim panel removal tool and set the
plastic panel aside.
Outer tailgate mechanism Inner tailgate mechanism
To Next Page
Loading...
