12
1313 Handheld Programmer Manual, Rev. B
In the Main Menu, highlight the Parameters icon and press the “Select” softkey
to go to the Parameters menu. You can return to the Main Menu at any time
by pressing the Main Menu key (
).
The Parameters menu is likely to be the menu you use most often. This is
where you can adjust the settings of the control system’s adjustable parameters.
You navigate through this complex menu using the arrow keys, +/- keys, and
softkeys, as described in Section 2.
The parameters shown depend on the controller model and on the access
level of your handheld programmer.
The Help function provides concise information about each parameter.
To access the Help function, press the Help key (
). Refer to your controller
manual for additional information about the various parameters.
With some “+\
-
” parameters, the item can be expanded to show a bar graph
indicating where the setting lies within the available range.
Here is a parameter called Forward Max, as it first appears:
PARAMETERS MENU
5 — PARAMETERS MENU
5
To Next Page
Loading...
Need help?
General
